This standard is issued under the fixed designation C; the number Conversion and rounding given in Standard IEEE/ASTM SI. The intention of this article is to clarify the specifications listed in ASTM C, Standard Specification for Mixing Rooms, Moist Cabinets, Moist. ASTM C Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage. Tanks Used in the Testing of Hydraulic Cements and Concretes.
|Published (Last):||6 April 2017|
|PDF File Size:||4.99 Mb|
|ePub File Size:||10.2 Mb|
|Price:||Free* [*Free Regsitration Required]|
Dry conditions, low temperatures, and abundant fresh water leaching can all lead to low strength specimens. The water in a storage tank shall be saturated with calcium hydroxide to prevent leaching.
C5511 it asmt nice to be able to have all of the temperature records on a computer, CCRL inspectors report that laboratories using these data loggers often forget to download and evaluate the data.
Some of the drawbacks include the pen drying out and having to be replaced often, and the temperature not reading correctly. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. The temperature of the solution in the tanks must also be monitored.
Historical Version s – view previous versions of standard. The air and mixing water temperatures and the relative humidity in the cement mixing room shall be maintained at specific values.
ICS Number Code The requirements for this soaking period are temperature and the use of calcium hydroxide. Your comment must be approved first. It is best to have them inside and against an interior wall.
Learn how to be an AASHTO lab 24/7
Saturated C cure tanks have a considerable amount of excess calcium hydroxide sitting in the bottom of the tank. Both curing tanks and moist rooms have their benefits and drawbacks. Whether you have multiple tanks or just one tank, you must perform routine maintenance. According to an informal poll of CCRL inspectors, the number of laboratories with curing tanks versus curing rooms is about evenly split. Requirements for Curing Tanks If asttm lab chooses to use curing tanks ast not inside a curing roomthe following information should help clarify some of the requirements.
If you decide to go this route, you will need to have at least one calibrated chart recorder or digital recorder per tank see Figure 1.
Login to be able to comment. No other units of measurement are included in this standard. Trying to cut corners on curing can produce erroneous test results. The water should be saturated. The easiest way to determine this is to add calcium hydroxide to the water and then stir the water.
Curing tanks might be a more cost-effective solution, but temperature control can be difficult, and they take up a lot of floor space. The system shall be equipped with a temperature recorder and a reference temperature measuring device that are to be placed practically near to each other.
Moist rooms can be expensive to build and maintain, but they also hold more specimens, which are easier to organize and locate when placed on shelves. Since there seems to be a lot of confusion and misunderstanding regarding curing facilities and their requirements, I decided to write an article about them.
The first option is to equip each tank with a temperature recorder that is monitored weekly. There is also the option of using a smaller moist cabinet for specialized projects rather than building an entire room. A common problem with misters is that they tend to clog.
This specification includes the requirements for mixing rooms where paste and mortar specimens are prepared and for moist cabinets, moist rooms, and water storage tanks where paste, mortar, and concrete specimens are stored; intended for use in the testing of hydraulic cements and concretes. It is highly recommended that laboratories institute a program in which the spray nozzles are switched out with a second set that has been soaking in a mild acid such as vinegar to slow the clogging process.
Can Portland cement grout cubes be cured in a water tank instead of curing cabinet? For tank maintenance, you are required to thoroughly stir each tank at least monthly to replace depleted calcium ions. No recording thermometer or thermostatic control is required. Maintaining c151 sets of working spray nozzles will be less time consuming than continuously repairing dripping nozzles, or suffering the consequences of improperly cured materials. In the end, remember that no matter how much precision is used to mix your ingredients, your curing methods will impact the strength of the material you are testing.
If you have more than one sstm, you have two options for configuration. Accidentally draining and overflowing a tank can occur if there is an equipment malfunction.
ASTM C, Test equipment Controls
zstm Each laboratory will need to consider the unique requirements of their testing needs when designing and maintaining a curing facility. Essentially, your tanks need to be made of a non-corroding material like thick plastic or metal. Pre-fabricated curing rooms are not on the market, so most labs make their own out of readily available materials.
After installing the main room and insulating it, labs need to install misters onto water lines spaced throughout the room. You’ve already submitted a review for this item.
Also consider all the man hours lost to constant maintenance and quick-fixes, not to mention having to spend time writing corrective action reports for your AASHTO re: The best way to make sure that you have a well-circulated, temperature-controlled facility that meets all of the requirements is to take the time and money to get it right the first time. This article can be utilized as a general guideline for curing materials that include Portland cement concrete, masonry mortar, masonry cement, concrete beams, grout, and hydraulic cement see Table 1.